WEDA D95 (60 Hz)
The WEDA drainage pumps handle either clean or sand-laden water, even with small solid particles, with the best performance and efficiency. These pumps are designed with robustness, sustained performance, and ease of maintenance in mind. Suitable for general dewatering applications, ground water, raw water, construction sites and harsh conditions on site.
Technical Details
Hydraulic range
N - Normal Head
H - High Head
SH - Super High Head
Insulation class
H (+180°C/+356°F) IEC 85 (VFD-ready)
Solids handling, strainer hole
0.63 in (16 mm)
0.47 in (12 mm)
0.47 in (12 mm)
Liquid temperature
Max 104°F (40°C)
Max 104°F (40°C)
Max 104°F (40°C)
Depth of immersion
Max 65 ft (20 m)
Max 65 ft (20 m)
Max 65 ft (20 m)
Max liquid specific gravity
1.1
1.1
1.1
pH of the pumped liquid
pH 5–8
pH 5–8
pH 5–8
Portable drainage pump
Installation
IP68
Protection class
Max ± 5% of nominal voltage
Voltage variation
Max 2% - between phases
Voltage imbalance
Max 30 starts / hour
Max start-stop
H07RN-F (20 m) or SOOW AWG (65 ft)
Cable
Corrosion resistant aluminum
Casted parts
High chrome iron, 55±5 HRC
Impeller
Rubber (NBR)
Wear parts
Corrosion resistant aluminum
Strainer
Stainless steel
Shaft
Rubber (NBR)
O-rings
Double row ball bearing, pre-greased
Main bearing
Stainless-steel cartridge-type double mechanical seal SiC/SiC
Mechanical seal
140°C / 284°F
Thermal contacts
External starter box Zinc anodes
Epoxy coating
Pump raft
NSSHÖU screened cable
Options / accessories
N - Normal Head
H - High Head
SH - Super High Head
Dimensions
Discharge connection
8 in
4 in
4 in
N - Normal Head
H - High Head
SH - Super High Head
52.4 in (1330 mm)
Height
52.4 in (1330 mm)
53.2 in (1350 mm)
18.1 in (460 mm)
Width
18.1 in (460 mm)
18.3 in (465 mm)
18.1 in (460 mm)
Diameter
18.1 in (460 mm)
18.3 in (465 mm)
589 lb (265 kg)
Weight
589 lb (265 kg)
660 lb (300 kg)
Performance Curve
Power Rating
Motor rating
3 ph
Std Cable
Power P1
48 kW
Power P2
58 HP
460 V
68 A
AWG2
3500 r.p.m.
Shaft Speed
AWG4
575 V
55 A